MTCTCE

MTCTCE – MikroTIk Certified Traffic Control Engineer Class,


Packet flow diagram

Firewall filter/nat/mangle

QOS

DNS Client/cache

DHCP client, relay and server

Web proxy

Certification test


The cost is $600


Duration: 2 days


Course Level: Engineer (advanced course)

Objectives: By the end of this training session, the student will be familiar with building advanced RouterOS firewalls, the packet flow diagram, traffic shaping, QOS, DHCP and web proxy.

Target Audience: Network engineers and administrators.

Prerequisites: MTCNA and reasonable experience using RouterOS.

About The Class

The exams are open book and 60% is required to pass.

A null modem serial cable (standard 9 pin D connectors) is helpful but not necessary.

The certification exam will be given with instant test results online.

Please note: The certification exams are prepared by MikroTIk. Passing the exam will depend on fully understanding the class concepts and will require a good base knowledge of TCPIP and networks. LearnMikroTik.com is not responsible for the content of the exams or your ability to pass the exams. A grade of 60% is required to pass and the exam is given “open book”.

Overview

Class Time: 2 days, class begins Tuesday morning at 8:30 am sharp and ends with the certification test the last day by 6:00 pm. All students attending and taking an exam will receive one free RouterOS Level 4 license

Cancellations: In case you need to cancel your participation at the seminar, a written notice should be sent in by e-mail to AThis email address is being protected from spambots. You need JavaScript enabled to view it. prior the seminar. There is an administrative fee of US$100 for refunds. There is no refund for training fee paid, if cancellation is received less than 10 days before the event.

Required Hardware

1) Each participant will be provided with a RouterBoard to work with during the class.

2) You need to bring the following items:

A laptop equipped with Ethernet port, and, if possible, a serial (COM1 or USB-to-COM) port for connecting to RouterBoard’s console; NOTE: Please install the MicroSoft .net environment on your machine prior to class!

5 Ethernet Patch Cables 2m/6ft 2pcs for connecting to the router and between neighbor routers

Power Strip for powering the laptop, router, and, possibly, your neighbor’s equipment